17 results in 0.0025 seconds.
-
Roof stripped
The car had been repainted several times, the olriginal grey and another 2 coats of white both differnt...
-
Outer sill replacement
Not amongst the most difficult jobs on the imp however it does take a fair bit of time and patience,... -
Drivers Side Rear Suspension Mount And Inner Wheel Tub Repair
Was bitter cold this mortning, so the grump was on from the get go !
... -
Thats last of the walk throughs so time to steam blast the shell.
Lovely pressure washer procured rather than media blasted.
Body treated with degreaser,... -
Upper scuttle section - a not so innocent panel with loads to hide
Each corner can hide a lot of pain, it is such an easy panel just to slap filler into and be done with... -
Body Side, sills modified coated and painted
Video attachments with my waffle on mods and coatings coming shortly
End result 2 body...Last edited by John A. Ross; 31 July 2023, 10:14 PM. -
The Imp Club National 2022 - Graham Crompton snaps a good one
-
Newly remade replacement floor pans for the Imp / Chamois / Sunbeam by ESP
New floor pan sections are now ordered from Ex-Pressed Steel Panels hopefully delivered in September...
-
Emergency wolsley pre-show repair for another club member
A small rapair for young Connel a few doors down before the last Stirling Car Show. He is not old enough...
-
pair of mk3 mini door bottoms impsport is back from the blaster Steveve Groves imp
It's been a busy week in the workshop with a pair of mk3 mini door bottoms repaired and new skins fitted,...
Last edited by John A. Ross; 19 February 2022, 11:07 AM. -
C.A. Restoration & Fabrication Steve Burton imp MK 1 rebuild progress Col Rooney
I can only watch so much TV qnd so after boxing day i have been doing a few hours each day on Steve...
Last edited by John A. Ross; 29 December 2021, 12:32 PM. -
Rollover Jigs, Rotisseries for the imp singer chamois sunbeam stilletto or imp van
So what do you use for a rollover igs, rotisseries for the imp singer chamois sunbeam stilletto or imp...
Last edited by John A. Ross; 24 January 2021, 07:15 PM. -
What make s a good forum - the ultimate question and the answer could indeed be 42 !
OK, I borrowed a science fiction reference but it could have been worse, it could have been a trekkie...
-
Body Panel - Suggested replacement panel for rear lower corner
Body Panel - Suggested replacement panel for rear lower corner
Recomendations on fitting... -
WSM141 Section D -CLUTCH AND HYDRAULIC CONTROLS
WSM141 Section D -CLUTCH AND HYDRAULIC CONTROLS...