Get creative
...
50 results in 0.0028 seconds.
-
Adding a reverse lamp switch to an imp
What do you do when waiting for stuff to dry and parts to be delivered ?
Get creative...
Last edited by John A. Ross; 3 May 2020, 04:26 PM. -
Front suspension bracket - mod front bracket nut/bolt to ease installation / removal
As come up in another thread by Bob and a further correction by Mike
Note - Early cars... -
Clutch roller release bearing
Bast cleaned clutch fork, strengthened and modified to accept a roller release bearing with a proper...
Last edited by John A. Ross; 6 April 2021, 07:36 PM. -
Billet rack mounts
The original cast ones corrode and crack so this was my solution CNC machined and anodised £60 a set...
Last edited by John A. Ross; 6 April 2021, 07:33 PM. -
Competition spec gearbox mounts
Competition Gearbox Mounts £140 pair delivered to UK mainland Motorsport tried and proven.
... -
Uprated donut bolts
Another common problem is people using the standard donut bolts, these bolts have a 7/16 shank and reduce...
Last edited by John A. Ross; 6 April 2021, 07:32 PM. -
Spin on oil filter recommendations
As discussed rcently on Facebook
...Last edited by John A. Ross; 15 April 2020, 08:06 PM. -
UJ conversion for gear linkage
Mikes UJ mounts and the old crusty one you likely have in your car now
... -
Billet rack mounts
https://photos.app.goo.gl/SXYj3GGMybrnGL6u8 Replaces the monkey metal standard items that crack and...
Last edited by John A. Ross; 31 March 2020, 03:31 PM. -
45D4 Distrinutor in bits - in case you want a look
45D4 Distrinutor in bits - in case you want a look
Bottom pin driven out and removed, inner... -
Wiring up the negative side of the battery -
The Imp has always had a weak spot as far as i am concerned which is the method by which the high current...
-
Location of front brake lines and routes - servo based at rear
As requested location of brake lines and routes for servo based cars. Example from parts manual
... -
Engine Bay Wiring - Colours and what to expect
Just a very quick reference to the wiring colours in your engine bay rather than look up the manual... -
Driveshaft lock nuts
There have been a few methods of trying to keep the driveshaft lock nuts tight on competition vehicles,... -
Body Panel - Suggested replacement panels for lower back of the rear wing
Last edited by John A. Ross; 8 March 2020, 03:51 AM.