C. Fuel & Exhaust System

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

Managed to get some paint on got the bug again ...

Hi all,

Firstly hope you are all well and staying safe!?

As...

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Closed, Sticky: WSM141 Section C - FUEL SYSTEM by John A. Ross Started by John A. Ross, 9 January 2020, 10:04 PM	4 responses 254 views 0 likes	Last Post by John A. Ross 9 January 2020, 10:09 PM
Picture of the imp sa the engine bay was intended by PMCG Started by PMCG, 28 January 2020, 08:02 PM	0 responses 687 views 1 like	Last Post by PMCG 28 January 2020, 08:02 PM
Updgrade item not in WSM, in tank fuel filter for tank dandruff by John A. Ross Started by John A. Ross, 26 January 2020, 02:42 PM	1 response 122 views 0 likes	Last Post by John A. Ross 28 January 2020, 05:52 PM
Fitting an lelctric fuel pump, Dave Lanes Singer by Dave Lane Started by Dave Lane, 22 January 2020, 07:11 PM	2 responses 517 views 4 likes	Last Post by Dave Lane 22 January 2020, 09:17 PM
Closed: Fuel pump union failure - a serious safety risk by John A. Ross Started by John A. Ross, 31 December 2019, 10:53 PM	0 responses 298 views 1 like	Last Post by John A. Ross 31 December 2019, 10:53 PM
Closed: Stromberg CD125 CARBS by John A. Ross Started by John A. Ross, 17 December 2019, 11:12 PM	0 responses 198 views 0 likes	Last Post by John A. Ross 17 December 2019, 11:12 PM
Closed: 28/36 information by John A. Ross Started by John A. Ross, 17 December 2019, 10:57 PM	0 responses 60 views 1 like	Last Post by John A. Ross 17 December 2019, 10:57 PM