Keiths SInger Chammy

[Colimp66]

Will need to slam it on the floor first John. Way to high in the air

[John A. Ross]

geeeeeze too much of a young fellar in you still Col

Just dip it down neutral in front , let engine and box settle down at back it will be fine

Then again I am a stick in the mud old fart according to the young un s!

[Colimp66]

you are correct Mr. Ross young at heart here. Can't do standard me

[John A. Ross]

Rollin rollin rollin, the floor the road is scoring.....

[lm57krm@gmail.com]

Once I get the cement bag in it will be fine ?

[PMCG]

Once I get the cement bag in it will be fine ?

Well said that man, I'm with you on this, brings back memories.

[lm57krm@gmail.com]

So, I thought I had finished welding but I poked around here! It's had some braising done in the past but then rusted around it! You can just see some of the brass there.

[John A. Ross]

Oh, not so good. Sorry keith it is the one thing I dont have spare or you would hav ebeen welcome to one to save the grief.

Save those small pips / jack points though, only ever fitted on early cars

[lm57krm@gmail.com]

Thanks John , yes I'm working round the jack points and looking to build in some strengths there.
its just another job for lockdown!
I will keep plodding on tho. ?

[lm57krm@gmail.com]

Repairs progressing ?

[John A. Ross]

Yip, if one side is shot, I would have a poke at other side as well Keith although I always had a theory these go as the drain holes get blocked. the 2G approach, grinder plus gravitex sorts all ????

[Colimp66]

Every little bit of progress helps in the end Keith, nice one.
Cheers
Col.

[lm57krm@gmail.com]

Yes, the other side is better but was also previously mended. It's not so like seive.

[lm57krm@gmail.com]

I keep getting a ? After all my posts even tho I don't type one. What have I done

[John A. Ross]

Keith, no idea off top of my head, what are you using to post phone tablet pc mac ?

Seems to have started 10th october, your first post in morning is fine, the ones later that day seem to have the ? at end.

I suspect the ? is a substitute for another character.