What's Happening - The Imp Club - Imp World

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go faster wipers

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

Organise a trackday for classic and historic saloons

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

68 stiletto

Managed to get some paint on got the bug again ...

BRU 434B And the Journey Begins - First Engine Removal and more

Hi all,

Firstly hope you are all well and staying safe!?

As...

Check Straps for Lowered Suspension - Daves Singer Chamois

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Sticky: The Imp Club - Linwood Area Centre Monthly Group Meeting by Hido-San Started by Hido-San, 17 December 2019, 02:52 PM	1 response 120 views 1 reaction	Last Post by John A. Ross 19 November 2020, 05:35 PM
Sticky: The Imp Club - Edinburgh Area Centre Monthly Group Meeting by John A. Ross Started by John A. Ross, 19 January 2020, 11:23 PM	0 responses 121 views 0 reactions	Last Post by John A. Ross 19 January 2020, 11:23 PM
Sticky: The Imp Club - Fife Area Centre Monthly Group Meeting by John A. Ross Started by John A. Ross, 19 January 2020, 11:13 PM	0 responses 83 views 0 reactions	Last Post by John A. Ross 19 January 2020, 11:13 PM
A post from Marcus Sandford by WebBot Started by WebBot, 25 February 2020, 07:48 PM	0 responses 16 views 0 reactions	Last Post by WebBot 25 February 2020, 07:48 PM
King pin query - too tight? Just replacing the king pins on my 68 imp - what a #### of a job! Managed eventually to press in the new bushes and fit new washers and seals - the carrier is a very tight fit into the stub axle and then the king pins itself is very tight when drifted home. I can just about swivel the carrier side to side when holding the stub axle and brake drum - but it takes all my force to do it. I'm assuming it's all too tight?… Do I need to polish/lightly sand king pin? Do something else? by WebBot Started by WebBot, 25 February 2020, 07:38 PM	0 responses 46 views 0 reactions	Last Post by WebBot 25 February 2020, 07:38 PM
❤️ big power ?❤️ by WebBot Started by WebBot, 25 February 2020, 07:24 PM	0 responses 171 views 0 reactions	Last Post by WebBot 25 February 2020, 07:24 PM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 07:01 PM	0 responses 10 views 0 reactions	Last Post by WebBot 25 February 2020, 07:01 PM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 06:24 PM	0 responses 15 views 0 reactions	Last Post by WebBot 25 February 2020, 06:24 PM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 05:39 PM	0 responses 11 views 0 reactions	Last Post by WebBot 25 February 2020, 05:39 PM
Readers Cars • Re: Doms nymph by WebBot Started by WebBot, 25 February 2020, 04:09 PM	0 responses 9 views 0 reactions	Last Post by WebBot 25 February 2020, 04:09 PM
1967 Singer Chamois Mark 2 brochure by WebBot Started by WebBot, 25 February 2020, 03:12 PM	0 responses 16 views 0 reactions	Last Post by WebBot 25 February 2020, 03:12 PM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 10:51 AM	0 responses 15 views 0 reactions	Last Post by WebBot 25 February 2020, 10:51 AM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 10:46 AM	0 responses 8 views 0 reactions	Last Post by WebBot 25 February 2020, 10:46 AM

Previous 1 730 740 750 755 757 758 759 760 761 762 763 765 770 776 template Next

No topics found.