What's Happening - The Imp Club - Imp World

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go faster wipers

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

Organise a trackday for classic and historic saloons

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

68 stiletto

Managed to get some paint on got the bug again ...

BRU 434B And the Journey Begins - First Engine Removal and more

Hi all,

Firstly hope you are all well and staying safe!?

As...

Check Straps for Lowered Suspension - Daves Singer Chamois

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Sticky: The Imp Club - Linwood Area Centre Monthly Group Meeting by Hido-San Started by Hido-San, 17 December 2019, 02:52 PM	1 response 102 views 1 like	Last Post by John A. Ross 19 November 2020, 05:35 PM
Sticky: The Imp Club - Edinburgh Area Centre Monthly Group Meeting by John A. Ross Started by John A. Ross, 19 January 2020, 11:23 PM	0 responses 66 views 0 likes	Last Post by John A. Ross 19 January 2020, 11:23 PM
Sticky: The Imp Club - Fife Area Centre Monthly Group Meeting by John A. Ross Started by John A. Ross, 19 January 2020, 11:13 PM	0 responses 83 views 0 likes	Last Post by John A. Ross 19 January 2020, 11:13 PM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 26 February 2020, 08:06 AM	0 responses 21 views 0 likes	Last Post by WebBot 26 February 2020, 08:06 AM
Readers Cars • Re: What did you do to your Imp today? by WebBot Started by WebBot, 26 February 2020, 06:15 AM	0 responses 12 views 0 likes	Last Post by WebBot 26 February 2020, 06:15 AM
Cars and Parts Wanted • Re: Boot/Bonnet Board by WebBot Started by WebBot, 25 February 2020, 11:01 PM	0 responses 12 views 0 likes	Last Post by WebBot 25 February 2020, 11:01 PM
What would these worth to sell as a pair. Red one running but rotten green is rolling shell in very good order by WebBot Started by WebBot, 25 February 2020, 09:14 PM	0 responses 27 views 0 likes	Last Post by WebBot 25 February 2020, 09:14 PM
At Lake Club Show Kolkata (INDIA) by WebBot Started by WebBot, 25 February 2020, 09:14 PM	0 responses 9 views 0 likes	Last Post by WebBot 25 February 2020, 09:14 PM
Wheeler dealers. Dream Car. Shepton mallet classic show. by WebBot Started by WebBot, 25 February 2020, 09:14 PM	0 responses 50 views 0 likes	Last Post by WebBot 25 February 2020, 09:14 PM
Glad to say my 1972 Imp Super "Nutmeg" passed her MOT today. Need to do a lot of re-painting etc underneath, possibly suspension removal really. Now here's an odd thing. The tester kept the engine running and the lights on whist underneath. What he didn't see was all the lights go out by themselves for about a minute, before coming back on on their own! Not sure if the dash switch is at fault or whether Nutmeg was playing a joke! Anyone else had this happen? by WebBot Started by WebBot, 25 February 2020, 08:40 PM	0 responses 21 views 0 likes	Last Post by WebBot 25 February 2020, 08:40 PM
Hi looking to get some 7x13 alleycat alloys for my imp can you tell me where I can buy these from cheers chris by WebBot Started by WebBot, 25 February 2020, 07:50 PM	0 responses 33 views 0 likes	Last Post by WebBot 25 February 2020, 07:50 PM
A post from Marcus Sandford by WebBot Started by WebBot, 25 February 2020, 07:48 PM	0 responses 16 views 0 likes	Last Post by WebBot 25 February 2020, 07:48 PM
King pin query - too tight? Just replacing the king pins on my 68 imp - what a #### of a job! Managed eventually to press in the new bushes and fit new washers and seals - the carrier is a very tight fit into the stub axle and then the king pins itself is very tight when drifted home. I can just about swivel the carrier side to side when holding the stub axle and brake drum - but it takes all my force to do it. I'm assuming it's all too tight?… Do I need to polish/lightly sand king pin? Do something else? by WebBot Started by WebBot, 25 February 2020, 07:38 PM	0 responses 40 views 0 likes	Last Post by WebBot 25 February 2020, 07:38 PM