Announcement

Collapse
No announcement yet.

well after trying to figure out why the V8 chassis is 5mm out on one side but central ive spent two days with tapes, levels, cla...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • well after trying to figure out why the V8 chassis is 5mm out on one side but central ive spent two days with tapes, levels, cla...

    well after trying to figure out why the V8 chassis is 5mm out on one side but central ive spent two days with tapes, levels, clamps etc.

    ive finally found out the wishbone are not the same, nor are the bottom ones and neither are the uprights on the chassis, so all in all the chassis is poss scrap, i havn't got the equipment to put it right, that does explain why there were washers between the wheel and hubs on one side and not the other and mis matched tyres to make it look right, so looks like the end of the V8 Imp

    Silly idea though













    (Feed generated with ********)

    More...
Working...
X