RGJ767E aka "Boris" Hillman Imp Super Spring Special - The adventures of !

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • John A. Ross
    Chief Tinkerer
    • 11 December 2019
    • 4839

    #61
    Today two things on the card.

    Brake service, just wipe their backside as they were fine anyway, still amazing though how easy the grease in the cylinders turns to crap


    Then blast the back arches to find what is loose, what was loose was plenty but at least its loose


    Click image for larger version

Name:	20200615_143048.jpg
Size:	415.6 KB
ID:	8999
    Click image for larger version

Name:	20200615_143100.jpg
Size:	394.0 KB
ID:	9000
    Click image for larger version

Name:	20200615_143043.jpg
Size:	404.3 KB
ID:	9001
    Click image for larger version

Name:	20200615_143057.jpg
Size:	405.6 KB
ID:	9002
    / John

    Comment

    • John A. Ross
      Chief Tinkerer
      • 11 December 2019
      • 4839

      #62
      And as we had a spare tin of POR15 left over from the mercedes seemed a good use to use it to secure/seal the arches.

      Top coat of black tomorrow

      This stuff sticks like poop, way too expensive to use nromally but we had it, brick hard when fully cured and in this case it has a great key

      Click image for larger version

Name:	20200615_192924.jpg
Size:	205.9 KB
ID:	9009
      Click image for larger version

Name:	20200615_192957.jpg
Size:	201.1 KB
ID:	9010

      / John

      Comment

      • John A. Ross
        Chief Tinkerer
        • 11 December 2019
        • 4839

        #63
        Thats the back arches and sills covered in some enamel top coat. Much much better, the olish had stained the existing coat so badly at sills.

        Everything well brushed in after getting all the loose stuff removed.

        Front arch corner painted and same treatment for front

        Click image for larger version

Name:	20200616_155846.jpg
Size:	337.2 KB
ID:	9023

        / John

        Comment

        • John A. Ross
          Chief Tinkerer
          • 11 December 2019
          • 4839

          #64
          Well with a couple of rattkle cans from Autopaint St Helens we started on the final spray.

          To be honest we ended up pausing as the paint was such a bad match, way too much for fading so going to leave it alone and let the paint fully cure and look at it again.

          For now all the inner wheel tubs are cleaned up and there is top coat on the repaired wing so that will do for now.

          Click image for larger version

Name:	20200618_184029.jpg
Size:	30.8 KB
ID:	9049
          Click image for larger version

Name:	20200618_184022.jpg
Size:	31.2 KB
ID:	9050
          Click image for larger version

Name:	20200618_144009.jpg
Size:	32.7 KB
ID:	9051
          / John

          Comment

          • Dave Lane
            Owner at Daves Corner
            • 10 December 2019
            • 836

            #65
            lookin good

            Comment

            • lm57krm@gmail.com
              Senior Member
              • 7 April 2020
              • 116

              #66
              Nice job John will be good to see it in the flesh!

              Comment

              • John A. Ross
                Chief Tinkerer
                • 11 December 2019
                • 4839

                #67
                Colours a mile off Dave, way too dark, so just gonna leave it coated for now and see what its like flatted back.

                Not sure if local paint shop will re-open.

                John
                / John

                Comment

                • John A. Ross
                  Chief Tinkerer
                  • 11 December 2019
                  • 4839

                  #68
                  And today the suspension back on after cleaning up the front arches.

                  The shocks and springs and bushes all in great condition.

                  Click image for larger version

Name:	14653_o.jpg
Size:	119.3 KB
ID:	9073
                  / John

                  Comment

                  • John A. Ross
                    Chief Tinkerer
                    • 11 December 2019
                    • 4839

                    #69
                    But colour match a mile off, Autopaint St helens now off the list of suppliers.

                    Click image for larger version

Name:	20200619_154218.jpg
Size:	301.2 KB
ID:	9076

                    Click image for larger version

Name:	20200619_152332.jpg
Size:	215.1 KB
ID:	9075

                    Click image for larger version

Name:	20200619_154525.jpg
Size:	205.2 KB
ID:	9078



                    Attached Files
                    / John

                    Comment

                    • Dave Lane
                      Owner at Daves Corner
                      • 10 December 2019
                      • 836

                      #70
                      thats miles out

                      Comment

                      • PMCG
                        Patrick McGrorty MK 1 FAN
                        • 11 December 2019
                        • 369

                        #71
                        Originally posted by Dave Lane View Post
                        thats miles out
                        Seems so to me too.

                        The stuff I put on with the little brush shown at the bottom was the same paint code and this is Gold as opposed to the new stuff which is more brown.

                        John is going to email the supplier and ask why the difference.
                        Patrick McGrorty

                        100% MK 1 just as rootes intended it, no mods, no problem

                        Comment

                        • PMCG
                          Patrick McGrorty MK 1 FAN
                          • 11 December 2019
                          • 369

                          #72
                          Originally posted by John A. Ross View Post
                          But colour match a mile off, Autopaint St helens now off the list of suppliers.
                          Not until they tell us to bog off.
                          It seems that far out there must be something wrong.

                          Give them the benefit of the doubt to correct it first. ;)
                          Patrick McGrorty

                          100% MK 1 just as rootes intended it, no mods, no problem

                          Comment

                          • John A. Ross
                            Chief Tinkerer
                            • 11 December 2019
                            • 4839

                            #73
                            Plugs looking a bit tatty, so much cleaning and outside the bttoms were getting crusty.

                            Click image for larger version

Name:	20200625_120354.jpg
Size:	35.9 KB
ID:	9191

                            So new plugs fitted, nice shiny things now been in there for many thousands of miles, at least they look OK on inside

                            Click image for larger version

Name:	20200625_121920.jpg
Size:	33.0 KB
ID:	9192

                            Suprisingly even given the style of the manifold which is one bar and 4 offshoots on the Nikki, very happy with those.

                            And of course the obligitory coolant flush, new stuff added.


                            Click image for larger version

Name:	20200625_123600.jpg
Size:	45.1 KB
ID:	9193

                            Need to get it out for some high RPM driving now to "test it"
                            / John

                            Comment

                            • John A. Ross
                              Chief Tinkerer
                              • 11 December 2019
                              • 4839

                              #74
                              Well end of an ERA for me.

                              Boris is now sold to a young lad in Fife who will be continuing the advnetures of Boris, some style changes on the cards though

                              Onwards

                              / John

                              Comment

                              Working...
                              X